You are here: Crushers > Installing Crushers

Installing Crushers

Select a crusher from theAggFlow DMdatabase or create a custom crusher using the Generic option.

Hover Over Image to Enlarge

It is possible to create custom gradations specific to the material or crusher. When custom gradations are not in use the simulation will use manufacturer defined feed size and product gradations in calculations.
If material smaller than the Closed Side Setting (CSS) is input to a crusherAggFlow DMwill calculate passing the material through the crusher without performing any crushing.
AggFlow DM default methodology assures that material passing through a crusher never becomes larger in the calculation, regardless of the feed size and settings.
Feed Assumptions to crushers are:
- Feed is well graded
- Capacity of Machine is known
- Machine is properly fed
- Wear parts and liners are in good condition
- Machine is operating properly
Discharge material from a crusher should be sampled to compare manufacturer discharge gradations to actual results at different settings. Sample buckets and modes can be used to show actual results at different settings.

To Install a Crusher

AggFlow ® 1994-2014 Bedrock Software Inc.