Export and Import Gradations

Export and Import material gradations to/from Start Points and Crushers using Microsoft Excel.

Hover Over Image to Enlarge

Select a Start Point item or a crusher (it will turn blue).
Right-click and select Adjust Feed Stream (start points) or Adjust Set-up (crushers) to open the adjustment window.
Select a gradation from the table that will be used to export to Excel.
Choose the Create New Feed button (start points) or Create New Gradation button (crushers) to open the CreateNew Gradation window.
Choose File, then Copy/Export to Excel. This will open Microsoft Excel and place the data in a spreadsheet format.

Select and Copy the data from an Excel spreadsheet to import.
Select a Start Point item or a crusher (it will turn blue).
Right-click and select Adjust Feed Stream (start points) or Adjust Set-up (crushers) to open the adjustment window.
Choose the Create New Feed button (start points) or Create New Gradation button (crushers) to open the Create New Gradation window.
Choose File, then Paste From Excel. This will paste the data previously copied from Microsoft Excel into the data window.
Verify all sizes are correct and save the data.

Some computers require Microsoft Excel to be open before the export of data to a spreadsheet can be completed.